Waterproofing Chemical

Product Details:

Sika?? Latex Power is a??synthetic rubber emulsion??which when added to cement slurry/ cement mortar/ concrete/ grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/ concrete/ cementitious grout.

Product Details:

SikaLatex® SBR is a synthetic rubber emulsion which when added to cement slurry / cement mortar / concrete / grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout.

Product Details:

It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make themwaterproof. The coating is UV stable and highly reflective with high flexibility

Additional Information:

• Delivery Time: 3 DAYS
• Packaging Details: BUCKET

Product Details:

STP No 1 when used as an admixture forms an internal barrier against water penetration. It also increases the plasticity of mortar, reduces water absorption and thereby guards against freezethaw damage. It is available in powdered form without chlorides or in a liquid formula which contains additives for additional densification of the mortar or concrete. STP No 1 will not increase the air content of mortar or concrete. It complies with IS 2645.

Additional Information:

• Delivery Time: 3 DAYS
• Packaging Details: 30 KG HDPE BAG

Product Details:

Latex based Mortar and screed modifi er & bonding agent.

For modifying and improving bonding of fl oor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modifi ed fl oor screeds; waterproof plasters for masonary and slurries. 

Additional Information:

• Production Capacity: 5000 ltr
• Delivery Time: 2 days
• Packaging Details: 20 kg, 50 kg bucket

Product Details:

AquaArm C-35 is a powder based integral crystalline water proofing system. It consists of Cement and various activechemicals. These active chemicals react with water and bye products of cement hydration which cause a catalytic reactionto form non soluble crystals. These crystals block the pore and capillaries of the concrete and thus concrete becomes Permanently Sealed From penetration of water.

Additional Information:

• Delivery Time: 3 days
• Packaging Details: HDPE BAG

Product Details:

AquaArm WPU 1K E is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing of concrete surfaces. AquaArm WPU 1K E provides excellent resistance to moisture, water, and salts penetration intoconcrete and masonry surfaces. It conforms to ASTM C-836. arment WYK rm WPU 1K-E

Product Details:

AquaArm Purtech H is a two component, spray applied fast setting coating based out of modified polyurethane/ HybridPolyurea Hybrid to achieve an elastic, high crack bridging waterproofing coating with long life expectancy.

Product Details:

Details:

CICO NO.1 is yellow coloured viscous liquid based on reactive additives and micro particles suspension with anti corrosive properties. This is used as an Integral Cement Waterproofing Compound for Cement Concrete and Mortar. 

USES

CICO NO.1 is used in construction of concrete roofs, bathrooms, sunken areas, swimming pools, basements, retaining walls, exterior plasters, etc.

FEATURES

 Ensures water tightness of concrete against water head. 

Eliminates/reduces dampness from the plastered surface of brick work. 

 Protects concrete from weak solution of acids/chemicals. 

 Prevents/reduces sweating, efflorescence, saltpeter action and fungal growth on the plaster surface of the brick Available 

Product Details:

AquaArm Ultra Coat is a single component, water based, high thermal reflectance & emittance coating, it has the ability toreflect the visible, infrared and ultraviolet rays. It significantly lowers the surface temperature of roofs and structuraexteriors arment AquaArm Ultra Coat

Additional Information:

• Delivery Time: 3DAY
• Packaging Details: BUCKET

Product Details:

AquaArm SBS 3000X is high performance, cold applied, flexible, preformed membrane with cross laminated HDPE filmwhich has a high chemical, puncture resistance. AquaArm SBS 3000X is a vapor, hazardous gas & waterproof membranefor water excluding structures. It protects structure from aggressive chemicals. Confirms type 2,3, &4 grade basement as per BS 8102: 2009, Type A waterproofing Product Confirms IS 16471: 2017, Type A waterproofing Product, Complies BRE 211 guideline.

Additional Information:

• Delivery Time: 3DAYS

Product Details:

Bonding segmented concrete bridges / structures to speed up construction and provide a structural and water resistant joint. Can be used for pointing Stone masonry joints to retain structural integrity

Product Details:

Water reducing and waterproofing admixture for all types of concrete and mortar.

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: 20kg, 100kg

Product Details:

Details:
CICO LATEX is a SBR based milky liquid admixture for concrete repair, waterproofing for concrete and mortar, bonding of old to old and old to new concrete and brick work, tiles, coping etc. The cement modified Styrene Butadine Rubber (SBR) is in use for the last few decades.

Product Details:

Details:

CICO ACRYL is acrylic latex based light white coloured liquid integral waterproofing compound. It is used in concrete and mortar/plaster where high degree of waterproofing is needed. Components of CICO ACRYL reacts directly with the free lime released in the hydration process of the Portland cement resulting in a highly water repellant substance which is deposited through the concrete/cement matrix. The presence of this integrally contained compound resists and reverses the normal tendency of hardened concrete to absorb water by capillary action. CICO ACRYL fully passes the requirements of IS: 2645 -2003.

USES

CICO ACRYL is used for all types of cement concrete in walls & floors, Precast panels, tanks and reservoirs, etc.

Product Details:

Details:
CICO NO.2 is an extra fast setting waterproofing/plugging compound. It is a red coloured liquid.

USES
CICO NO.2 is an excellent time tested liquid admixture for emergency / immediate repair work. Due to very fast setting property, CICO NO.2 is used for instant leak plugging and quick fixing of nozzle and also widely used as plugging compound for basements, pipe joints, retaining walls, tunnels and sewage works, where water is pouring under pressure.

FEATURES

•  Excellent quality plugging compound consistent performance
•  High early strength plugging is completed within 5 minutes
•  Simple application excellent adhesion

Product Details:

A concrete / mortar admixture in liquid form that acts both as a plasticizer and waterproofing compound.

USES- Sika Plastocrete Plus is recommended for use in structural concrete such as:

•  Sloped Roof Slab 
•  Flat Roof Slab
•  Beams
•  Columns
•  Slabs etc

Also used in:

•  Internal and external plaster of buildings etc.
•  Repair and renovation

Additional Information:

• Production Capacity: 5000 ltr
• Delivery Time: 1 Day
• Packaging Details: 20 kg, 100 kg, 200 kg, 230 kg

Product Details:

LUBRICATOR FOR CONCRETE PUMP HOSES AND PIPELINES.

DESCRIPTION Sika® Lube One is a specially formulated product for the lubrication of concrete pumps, hoses and pipelines prior to concreting works. It is a cost-effective replacement for slurries made from bagged cement.

USES The long chained organic molecules of Sika® Lube One in contact with water produce a “greasy” film which lubricates the walls of the pump, pipes and hoses and thus facilitates trouble free pump starting. Sika® Lube One has the following uses:  Pump start of standard concrete mixes  Pump start of shotcrete  Pump start of mortar mixes

Additional Information:

• Production Capacity: 1000
• Delivery Time: 3 days
• Packaging Details: 200 gram pouch.

Product Details:

SikaPlast® 3069 NS Imparts good workability, workability retention and allows decrease in water content.

USES
SikaPlast®-3069 NS a plasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls and columns and other structural and non structural elements. Specially recommended for the following types of concrete:  Ready mixed concrete   Pumped concrete  Site batched concrete  PQC concrete

Additional Information:

• Production Capacity: 10000 kg
• Delivery Time: 2 days
• Packaging Details: 230 kg barrel

Product Details:

Two Component Polymer modified flexible Cementitious waterproofing coating.

Product Details:

AquaArm WPU 1K E is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing of concrete surfaces. AquaArm WPU 1K E provides excellent resistance to moisture, water, and salts penetration intoconcrete and masonry surfaces. It conforms to ASTM C-836

Additional Information:

• Delivery Time: Immidiate
• Packaging Details: 25 kg pack

Product Details:

Styrene free vinyl-ester resin based cartridge system, for anchoring reinforcement and fixings into a variety of substrates. Extended setting for hot climates. 

Product Details:

It is chloride free quick setting cement after addition of water its sets instantly and useful for plugging purpose.

Additional Information:

• Delivery Time: 2 DAYS

Product Details:

AquaArm IM consists of Portland cement, treated quartz sand and compound of active chemicals. The active chemicalsreact with water and the by-products of cement hydration to cause a catalytic reaction, which generates an insolubleintegral crystals. These crystals grow in the presence of water and block the capillaries of the concrete and minor shrinkage cracks, thus waterproofing the concrete. 

Additional Information:

• Delivery Time: 3DAYS
• Packaging Details: BAG